What’s different
in Collingwood Park.
Many Collingwood Park homes have had drain sections replaced or extended over the years, sometimes in a different material and almost never with a record kept. A camera maps what is there before anyone quotes a repair. That matters most when the house has changed hands since.
Historic mine workings sit beneath parts of Collingwood Park. A camera can show displaced joints or a change in fall after ground movement, and you want that footage before choosing a repair method. A pipe in ground that is still moving needs a different approach.
Mostly PVC. Where ground has moved, displaced joints and changes in pipe fall can cause repeat blockages in one spot. 92% of occupied homes in Collingwood Park are separate houses, so the drainage and stormwater on your block are almost certainly yours to maintain up to the connection point.
Part of Collingwood Park is underlain by the decommissioned Westfalen No. 3 and New Redbank collieries, and subsidence events in 1988 and 2008 damaged houses in the suburb. The Queensland Government maintains information about the area and its assistance arrangements. Queensland Government: Collingwood Park mine subsidence ↗
What the data says about Collingwood Park
- The pipes
- Collingwood Park homes mostly run copper supply pipes from the 1960s to 1990s. The original fittings are wearing out. Ground movement above old mine workings adds stress to buried pipes here.
- Flood and silt
- Council's flood mapping does not show the major floods reaching Collingwood Park, so silt and floodwater in the plumbing are rare here.
- The houses
- 92% of the 3,060 dwellings in Collingwood Park are separate houses (2021 Census), each with its own drains to the boundary.
How the plumber finds the cause
The plumber feeds a camera along the drain from a suitable access point and shows you what it finds: blockages, roots, cracks, displaced joints, sections holding water. Where it matters, they mark the fault on the surface so its depth and position are known before anyone digs. More on cCTV drain inspections ↗
What to send us
Find any old drain reports, footage or site plans. Tell us which fixtures are affected and where the inspection openings are. If a builder, insurer or another trade needs footage or a written summary, mention it up front so the job is scoped for it.
What moves the price
Drain length, access, whether it needs clearing first, and whether you want locating and a written report all change the job. A look at one problem section costs less than a full condition survey of the property.
Typical cost in Collingwood Park
Collingwood Park homes pay what the rest of Ipswich pays: per inspection, usually $250–$550. Brisbane flat rates sit around $400 to $520 including GST, often with the first hour of jetting.
| Job | Typical range |
|---|---|
| CCTV inspection, line clear and accessible | $250–$350per inspection |
| CCTV inspection where the drain needs jetting first | $400–$550per inspection |
| Flat first-hour rates, Brisbane operators | $398–$523incl. GST |
| Inspection plus jetting to clear | $350–$900per job |
Full cCTV drain inspections price guide ↗
Indicative ranges, not quotes. Compiled in October 2026 from published Australian cost guides and plumber price lists, with Queensland and Brisbane figures used where they exist. The licensed plumber prices your job after seeing it, and their price can fall outside these ranges. GST is included where the published figure included it.
Sources: ABS 2021 Census QuickStats: Collingwood Park · Queensland Government abandoned mines information. Distances are straight-line from Redbank Plains. Housing descriptions are general observations, not a survey of any individual property.
