What’s different
in One Mile.
In One Mile, sewer faults are usually confined to one deteriorated section or junction while the rest of the drain is sound. Check that before accepting a quote to replace the lot. A camera-based assessment targets the repair and shows whether a no-dig method suits your fault.
Older drains of mixed materials on mostly flat blocks. 87% of occupied homes in One Mile are separate houses, and 14% are townhouses or apartments. In those, a blocked drain can involve shared pipework, so bring the body corporate in before anyone books work.
What the data says about One Mile
- The sewer
- One Mile is sewered, so wastewater goes to an Urban Utilities treatment plant. You look after the sewer drains under the house.
- The pipes
- One Mile homes mostly run copper supply pipes from the 1960s to 1990s. The original fittings are wearing out.
- Flood and silt
- Council's flood mapping does not show the major floods reaching One Mile, so silt and floodwater in the plumbing are rare here.
How the plumber finds the cause
The plumber inspects and locates the damaged section first, so the repair goes where the fault is. That could mean a short excavated replacement, a longer repair, or relining from inside the existing pipe. The evidence picks the method. More on sewer drain repairs ↗
What to send us
Keep any old footage, repair invoices or drainage plans. Tell us where the overflow appears and how many fixtures it affects. Avoid contact with wastewater, and stop using any overflowing fixture until it has been checked.
What moves the price
Excavation access, depth, the length of the fault, the repair method and surface reinstatement drive the price. A complete quote covers the pipe repair, reaching it, and restoring the area. One that only mentions the pipe is missing part of the price.
Typical cost in One Mile
One Mile homes pay what the rest of Ipswich pays: to dig up and replace a damaged section, usually $1,000–$3,000. Relining $400 to $1,000 a metre; replacing a whole line $6,000 to $15,000.
| Job | Typical range |
|---|---|
| CCTV inspection to locate the fault | $250–$550per inspection |
| Replace a section of drain, excavated | $1,000–$3,000per job |
| Excavate and replace, longer or deeper runs | $2,000–$8,000per job |
| Reline the damaged section instead | $400–$1,000per metre |
Full sewer drain repairs price guide ↗
Indicative ranges, not quotes. Compiled in October 2026 from published Australian cost guides and plumber price lists, with Queensland and Brisbane figures used where they exist. The licensed plumber prices your job after seeing it, and their price can fall outside these ranges. GST is included where the published figure included it.
Sources: ABS 2021 Census QuickStats: One Mile. Distances are straight-line from Redbank Plains. Housing descriptions are general observations, not a survey of any individual property.
